SpeedAngle Lap Timer - Master the Art of Cornering

SpeedAngle is a 10Hz GPS Lap Timer with Lean Angle Measurement and G-Forces. GPS+GLONASS enabled.

News at SpeedAngle Australia & New Zealand

Below is the latest news and events from SpeedAngle.

SpeedAngle Apex Software + Firmware Upgrade [ENGR012]

Speedangle time

Speedangle have released a new firmware upgrade for Apex Model.

Realeased 9th April 2018 Version R012

This update is strongly recommended for all users with firmware ENGR007 and above.

Download Firmware Update File DashApex ENG.R012.sadfu2


The steps are as below:

​Download firmware and Software from the links below. Turn on the device

Launch SpeedAngle R4 R0.07 Software. Go to MENU > TOOLS > LOG DOWNLOADER

Click CONNECT to connect device. Click DEVICE FIRMWARE UPDATE at the bottom. Browse for the firmware file.

Wait till the update is complete. This normally takes less than 10 seconds.​

​That's it. DO NOT disconnect the device during firmware update or disrupt the ​update process in any way. It is also recommended not to do the update while the computer is multi-tasking. Otherwise, the firmware in the flash might be damaged and can only be restored by sending the device back to us.
 
Use the mouse right click to "save as" files to your computer.
 
Click Here to Download [SpeedAngle R4 Apex Software R0.07] This is a zip file. Uncompress and start using, no install required with this .exe file.
 
DashApex ENG.R012.sadfu2 [Firmware Upgrade File]
 
More information and how to can be found here https://www.mototrack.com.au/firmware-update-r012.html
 
 
 

SpeedAngle Apex Software + Firmware Upgrade [ENGR011]

Speedangle time

Speedangle have released a new firmware upgrade for Apex Model.

This update is strongly recommended for all users with firmware ENGR007 and above.

Download Firmware Update File ENGR011


The steps are as below:

​Download firmware and Software from the links below. Turn on the device

Launch SpeedAngle R4 R0.07 Software. Go to MENU > TOOLS > LOG DOWNLOADER

Click CONNECT to connect device. Click DEVICE FIRMWARE UPDATE at the bottom. Browse for the firmware file.

Wait till the update is complete. This normally takes less than 10 seconds.​

​That's it. DO NOT disconnect the device during firmware update or disrupt the ​update process in any way. It is also recommended not to do the update while the computer is multi-tasking. Otherwise, the firmware in the flash might be damaged and can only be restored by sending the device back to us.
 
Use the mouse right click to "save as" files to your computer.
 
Click Here to Download [SpeedAngle R4 Apex Software R0.07] This is a zip file. Uncompress and start using, no install required with this .exe file.
 
ENGR011 [Firmware Upgrade File]
 
More information and how to can be found here https://www.mototrack.com.au/firmware-update-r011.html
 
 
 

SpeedAngle Apex Software + Firmware Upgrade [ENGR010]

Speedangle time

Speedangle have released a new firmware upgrade for Apex Model.

This update is strongly recommended for all users with firmware ENGR007 and above.

Download Firmware Update File ENGR010


The steps are as below:

​Download firmware and Software from the links below. Turn on the device

Launch SpeedAngle R4 R0.07 Software. Go to MENU > TOOLS > LOG DOWNLOADER

Click CONNECT to connect device. Click DEVICE FIRMWARE UPDATE at the bottom. Browse for the firmware file.

Wait till the update is complete. This normally takes less than 10 seconds.​

​That's it. DO NOT disconnect the device during firmware update or disrupt the ​update process in any way. It is also recommended not to do the update while the computer is multi-tasking. Otherwise, the firmware in the flash might be damaged and can only be restored by sending the device back to us.

This Firmware Upgrade is for All Apex Lap Timers with Serial Numbers A2680001 - A2680168.
 
Use the mouse right click to "save as" files to your computer.
 
Click Here to Download [SpeedAngle R4 Apex Software R0.07] This is a zip file. Uncompress and start using, no install required with this .exe file.
 
ENGR010 [Firmware Upgrade File]
 
 

SpeedAngle Software + Firmware Upgrade

firmware-packaging

Speedangle have released a new firmware upgrade for 2015 models. [Non External Antenna Models Only]
The major new features include:
The option to turn an additional satellite system on. Double Constellation GPS-GLONASS Receiver.

It current model was GPS only; from now on it is GPS and GLONASS by default. The benefit of adding GLONASS is quicker fix with more satellites locked on to at the same time. This way, the your SpeedAngle will get good GPS signals even if the device is turned on just before he/she starts riding. The downside is that the trace recorded will be just a not quite as neat as GPS Only. GLONASS can be turned off via the System Menu.

The option to adjust sensor vibration filter setting according to the customer's riding condition.

SpeedAngle Lap Timer with Lean Angle Measurement

Now available in Australia  "Master the Art of Cornering"

Only $495 RRP + FREE EXPRESS POST SHIPPING

As advertised in Australian Motorcycle News
Mototrack Accessories is the Australian Distributor of SpeedAngle | Dealer Enquires are welcome, please call 0411 477 497.

Buy SpeedAngle Lap Timer

facebook_page_plugin